BRCOVAN Motorcycle Phone Mount with Qi 15W Wireless Charger & 30W PD/USB-C Fast Charging - Anti-Theft Handlebar Phone Holder with Vibration Dampener for 5.4''-7.2'' Smartphones - Perfect for Adventure Riding, Commuting & GPS Navigation

$32.99

$59.99

Safe 45%

BRCOVAN Motorcycle Phone Mount with Qi 15W Wireless Charger & 30W PD/USB-C Fast Charging - Anti-Theft Handlebar Phone Holder with Vibration Dampener for 5.4''-7.2'' Smartphones - Perfect for Adventure Riding, Commuting & GPS Navigation

$32.99

$59.99

45% Off

Delivery & Return: Free shipping on all orders over $50

Estimated Delivery: 10-15 days international

15 people viewing this product right now!

SKU: 29553076

Guranteed safe checkout

Description

The motorcycle phone mount with Qi wireless charger & PD/USB-C charging port (1) Compatible with Qi15W/10W/7.5W/5W wireless charging mode (2) Package includes 59'' cable to connect to battery (3) Designed with independent power control switch (4) Wireless charger and USB-C charging port can charge two devices at the same time (5) Waterproof grade: IP66 (6) wireless charger maximum output 15W, USB-C port 30W max. Anti-shock and anti-shake design Accessories included with the package allow this motorcycle phone mount easy to attach to handlebars and rear-view mirror Protective mobile phone holder design After locking the anti-theft screws of the double socket arm with the special wrench attached to the package, you can only loosen the knob to adjust the angle of the mobile phone holder, but you cannot disassemble the mobile phone holder. This ingenious design is convenient for you to adjust the angle of the mobile phone holder at any time, and it can also prevent your mobile phone holder from being easily disassembled, thus playing the role of anti-theft protection.When using double socket arm to connect the phone holder and handlebar mounting base, please first remove the anti-theft screws on the double socket arm knob. Loosen the knob of the double socket arm, insert the ball head of the mobile phone holder and the ball head of the handlebar mounting base into the double socket arm, lock the knob, and insert the anti-theft screw. finish installation. With Vibration Dampener & High-Speed Secure Lock Design. More Suitable for Off-Road Riding. Adjust the Compatible Size of the Mount According to the Mobile Phone Fit Handlebars Diameter: 0.5'' / (12mm) 0.875'' / (22mm) 1.0'' / (25.4mm) 1.125'' / (28.6mm) 1.26'' / (32mm) The Ways To Connect Power Connect the red terminal of the SAE wire to the positive power supply of the motorcycle electric door lock (power start switch), or directly connect to the positive pole of the battery. The negative black terminal is connected to the negative of the battery, or to any metal part on the motorcycle frame, and is ready to use after power is applied.

Shipping & Returns

For all orders exceeding a value of 100USD shipping is offered for free.

Returns will be accepted for up to 10 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item.

Otherwise, standard shipping charges apply. Check out our delivery Terms & Conditions for more details.

Features

Wireless Charger and PD/USB-C Charging Port The wireless charger and PD/USB-C charging port of this motorcycle phone mount can charge two devices simultaneously. The wireless charger of this motorcycle mobile phone holder is compatible with Qi15W/10W/7.5W/5W wireless charging modes on the market. PD/USB-C port 36W max, 5V/3.5A, 9V/3.5A, 12V/3A. Waterproof level IP66

Note The input voltage is DC 12V-24V. It cannot be connected to a vehicle battery with a voltage exceeding 24V

Sturdy & Secure The main body of this motorcycle phone cradle is made of PA66+GF30% high-strength material, with built-in high-quality 304 stainless steel telescopic rods. Adopts aluminum alloy handlebar mounting base & rear-view mirror mounting base

Anti-Theft Design The double socket arm & handlebar mounting base are equipped with special safety screw. The package comes with a special wrench to tighten the safety screw. This design keeps your phone mount from being easily removed. Note The anti-theft design is to ensure that the mobile phone mount is not easily removed, not an anti-theft design for mobile phone

Anti-shock, protect mobile phone camera With shock-absorbing design, absorb the vibration transmitted from the handlebar to the mobile phone holder. The motorcycle handlebar cell phone mount also built-in with soft silicone that keep your phone from scratches and vibration. Phone mount & phone camera features a non-contact designed to keep the phone camera from being squeezed and scratched while riding

Anti Shake, Protect Your Phone The special structure of this motorcycle phone mount can tightly wrap your smartphone. Designed with High-Speed Secure Knob After putting your phone in, tighten the knob on the back of this motorcycle phone mount, make sure your mobile phone is securely attached to the motorcycle phone holder even when riding at high speed on bumpy roads

Easy To Install Accessories included with the package allow this cell phone holder easy to attach to handlebars and rear-view mirror. The handlebar mounting base fit for handlebars 0.5''(12mm) / 0.875''(22mm) / 1.0''(25.4mm) / 1.125''(28.6mm) / 1.26'' (32mm) in diameter. Package also includes rear-view mirror mounting base. Convenient for you to install the phone holder on the motorcycle mirror

Adjustable Design, Wide Compatibility The body size of the motorcycle phone mount can be adjusted according to the size of your phone. Holds Phones (Case Included) Dimensions Length 5.03'' (128mm) - 7.59'' (193mm), Width 2.48'' (63mm) - 3.46'' (88mm), Thickness 0.787'' (20mm ) Max. Compatible with phone screen diagonal size 5.4''-7.2''

Easy to Use Put in or take out your phone with just one hand in one second, very convenient. 720 degree rotation design, can be easy to adjust the mobile phone to horizontal or vertical screen. Enjoy a easy riding

Reviews

*****

Verified Buyer

I have a S22 Ultra in a Unicorn Beetle case - dimensions 3.5"x7"I have maxed out the width of this charger can but there is about 1/2" additional length left in charger.what I like best: * Fast charging MORE than enough to overcome 100% screen brightness + music + gps I like the guarantee to arrive with more charge than when I left. I took screen prints the 1309ma is phone charging with no apps running. the 1190ma is music and gps running not sure about screen brightness level. * I like that the bottom feet can be moved up/down as to set unit for optimal charging of phone (center point of phone to center of charging ring) * anti-vibration the High Frequency trilly/buzzy frequencies that can damage cameras are attenuated shakes still occur but that is true for all anti-vibration phone mounts, shake-yes, buzzy no. * Secure. the spring tension is more than enough to make my 7" phone secure. A "speed screw" (3/4 revolution) locks spring extension bar in place but this is un-needed. I think shorter phones will need speed screw more than longer ones. * the power brick clips into an integrated clip of mount so everything has a home. the powerbrick has an easy to reach "off" switch for those times when 97 / sunny / stuck in traffic and phone going into thermal overload. I wired device not to battery but to Accessory Circuit so device turns off with bike and turns on with bike If I didn't do this I would need to remember to hit that button so no drain on battery when parked. * device feels "hefty" and well built. * you can insert/remove phone one handedwhat I like least: * I'm not fond of the anti-theft screws like found in bathroom fixtures. There is a chance I will lose this specialty allen and N years from it will be me having issues removing the phone mount. I would have preferred standard allen bolts and just live with the fact that someone could mess with my mount. But on the bright side the design works. The thumb adjustment for ball tension works you can loosen/tighten the ball but you can not spin bolt enough to loosen it for mount removal from bike. * the power brick seems like an after thought so engineer made a nice bracket to hold it. I'm not sure why powerbrick exists, it seems it this should have been internal to mount.note:It appears vibration mounts move within itself.It looks like something that should be spray lubed from time to timeas its not something you want sticking/binding.

-45% Off