Oumefar XH-M604 6-60V Digital Display Battery Charger Control Module - DC Charging Board for Solar Power, Home, RV & DIY Projects | Perfect for Off-Grid Energy Systems & Battery Maintenance

$5.6

$10.19

Safe 45%

Oumefar XH-M604 6-60V Digital Display Battery Charger Control Module - DC Charging Board for Solar Power, Home, RV & DIY Projects | Perfect for Off-Grid Energy Systems & Battery Maintenance

Oumefar XH-M604 6-60V Digital Display Battery Charger Control Module - DC Charging Board for Solar Power, Home, RV & DIY Projects | Perfect for Off-Grid Energy Systems & Battery Maintenance

$5.6

$10.19

45% Off

Delivery & Return: Free shipping on all orders over $50

Estimated Delivery: 10-15 days international

20 people viewing this product right now!

SKU: 89436714

Guranteed safe checkout

Description

This product is suitable for 6-60V battery charging control, and can set up the modes of charging voltage and stop charging voltage.Suitable for use in home charger, solar energy, Wind generator.Input charger 6-60v in the IN end, connect storage battery in OUT end. for example, setting the 12V start ,and 15V stop, when the voltage is less than 12V, The relay closes and send the charging voltage of the charger to the battery, When the voltage is higher than 15V, the relay disconnect and stop charging discharges. Specifications Input Voltage DC 6-60V Display Precision 0.1V Control Precision 0.1V Output Type direct output Voltage error +/-0.1V Application Fields 6-60V storage battery Size 81*54*24mm/3.19*2.13*0.94inch Package Included 1 x Battery Charge Control Module Using Method: In the setting of the voltage value, the start button plays role of Up-adjust action, stop button plays the role of Down -adjust action Set Starting Voltage: in normal display voltage state, press the button will display start charging voltage; long press for 3s the digital tube will flash; you can start or stop button to set starting up charge voltage value Set Stop Voltage: in normal display voltage state, press the button will display stopping charge voltage; long press the button for 3s the digital tube will flash; you can start or stop button to set stopping charge voltage value.Factory Reset: in power on state press the start/stop button at the same time, digital tube will display 888; that represents factory reset settings.

Shipping & Returns

For all orders exceeding a value of 100USD shipping is offered for free.

Returns will be accepted for up to 10 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item.

Otherwise, standard shipping charges apply. Check out our delivery Terms & Conditions for more details.

Features

USED FOR This low voltage disconnect is suitable for 6-60V battery charging control, and can set up the modes of charging voltage and stop charging voltage

WITH DIGITAL DISPLAY This battery board is equipped with digital display for easy reading, conveninet to monitor the charging status

EASY TO USE Input charger 6-60v in the IN end, connect storage battery in OUT end. For example, setting the 12V start, and 15V stop, when the voltage is less than 12V. The relay closes and send the charging voltage of the charger to the battery, when the voltage is higher than 15V, the relay disconnect and stop charging discharges.

WIDE APPLICATION Battery charging control module is suitable for use in home charger, solar energy, wind generator and more.

LOW POWER CONSUMPTION Automatic power outage, avioding the battery from over discharging to prolong the battery life time and save energy

Reviews

*****

Verified Buyer

If you need to connect a voltage source ( up to 60 VDC) this is for you. I design control systems for a living and this little, well designed circuit replaced a Honeywell DC3000 controller, a 200 watt inverter (to run the controller), a 12 VDC step down regulator ( 14.5 vdc lithium titanate source) and a 12 VDC control relay ( to connect the battery to a 200 watt solar array.) All of that went away when this went in. Another bonus, only draws 5 watts (was 35 watts with the old system). Very important when your running on batteries in a remote location. A little setup advice:1. Set the disconnect voltage first. Button on the right.This device is smart enough to not let you set them upside down.2. The reconnect voltage is set on the left button and can be as low as .1 vdc below the disconnect. It’s always lower than the disconnect voltage.The design won’t let you set them upside down. It comes from the factory set at around 12 volts and can’t be set higher until you raise the disconnect voltage. Also the relay handles 30 amps, 30% bigger than most. All this for 5 watts. Again, great design. You can get these with analog setting pots, but why bother when you can get this precision.

-45% Off